Products
Protect your precious property with the best products
NCT
Conductive Noise can divide Normal Mode Noise and Common Mode Noise. Normal mode noise come into power line as Transient, Impulse etc. and going and returning between Line and Neutral.
Common mode noise means the noise which come into from power line go through Earth (Ground) or move to reverse side (from Ground to power line).
Most of normal mode noise occur in short time and disappear. It makes error of device and effect to electrical transmission data.
Common mode noise can be affect to memory device and system, logic circuit based on ground electric potential or electric device which adopt the logic circuit.
So EMI/RFI noise filter should have right circuit to filter these two kinds of noise and designed according to the range of frequency.
- SPECIFICATION
- • Rated System Voltage : Single-Phase 250V, 3-Phase 120V ~ 450V
- • Rated Current : 1mA ~ 2mA MAX
- • Operating Temperature : -25℃~+85℃
- The Advantage of NCT
- • When a ground potential is a difference, where it can not be grounded, using the location grounding condition is poor Also it will be effective.
- • It with stands high voltage surge.
- • It is suitable for Noise measures, such as medical equipment.
- • Generated from the noise and the power supply line that is generated from the device. There is a two-way blocking properties that blocks both of noise.
- • There is no adverse noise level is high.
- Spec Sheets and Downloads
- iconData sheet
No posts have been submitted.